About cogriadmin

CoGri Group main

Concrete Grinding Ltd Gives Extra

After the success of the last project for a client in 2012, CG returned to a facility near Stuttgart, to carry out ultraflat floor grinding using the Laser Grinder® XPT at their new extension, working once again in collaboration with BS Bodensysteme GmbH, Concrete Grinding’s partner in Germany. The publishing and distribution company’s facility was [...]

2017-04-27T11:08:10+00:00 March 1st, 2014|

Solution Improved Trucks Efficiency

Concrete Grinding Ltd’s narrow aisle floor grinding solution helped to improve their client’s man riser narrow aisle trucks efficiency at a facility in Denham, Uxbridge, UK. Bosch UK head office at Denham, had a challenge with their trucks which were swaying from side to side in aisles due to uneven floor surface. Subsequently, the Linde [...]

2017-04-27T11:08:11+00:00 March 1st, 2014|

Lets Face it On-Site

Face Consultants Australia continues to grow and again this year they have been busier than ever with various on-site supervising roles including the construction of a huge steel fibre floor in Perth for one of Australia’s leading logistics supply chain provider. Constructing industrial warehouse slabs has many challenges, from perfecting the design, through to the [...]

2017-04-27T11:08:12+00:00 March 1st, 2014|

Concrete Grinding Ltd Saves the Day

Concrete Grinding Ltd was awarded an assignment in Bük, Hungary, to put right a flooring project where another company had failed to deliver the precise floor flatness requirements. Unfortunately this type of contract is not unusual for us, as there are very few flooring contractors who can demonstrate a full understanding and proficiency in VNA [...]

2017-04-27T11:08:14+00:00 December 10th, 2013|

Laser Grinding International

Concrete Grinding have been extremely busy in the last quarter with men and machines working and moving all over the world, a logistical challenge that tested the team’s ability to the limit! After completion of a Laser Grinding contract for CoGri Korea, the Laser Grinder® was sent back to Australia to complete a project for [...]

2017-04-27T11:08:15+00:00 December 1st, 2013|

Launch of TR34 4th Edition

After four years of hard work, the 4th Edition of Concrete Society Report TR34 has finally been published. Face Consultants have been uniquely placed to take a leading role in the project, being able to draw on their worldwide experience. Face Consultants have therefore been at the forefront of the development of this edition. Managing [...]

2017-04-27T11:08:16+00:00 September 1st, 2013|

Eliminate Rocking Floor Slabs

The CoGri Group has acquired exclusive European distribution rights for the patented SD7 Joint Saver, which will be marketed as the CoGri Joint Stabiliser and managed by CG Flooring Systems Ltd. The CoGri Joint Stabiliser (CJS) is a fast, cost-effective method for eliminating rocking slabs. CJS is a split aluminium cylinder (3” diameter, 7” long) [...]

2017-04-27T11:08:16+00:00 September 1st, 2013|

Australia is Flat

CoGri Australia's Laser Grinder® was back in action this quarter grinding 400 linear metres of 3 wheel track grinding for one of the largest global food service equipment suppliers. The project entailed grinding 13 aisles 30.7m long to flatness specification DM3 of TR34 Appendix C. Three wheel tracks were ground to accommodate Jungheinrich narrow aisle [...]

2017-04-27T11:08:17+00:00 March 10th, 2013|

Concrete Floor Grinding for Improved Truck Efficiency

VNA floor grinding experts Concrete Grinding Ltd (CG) have successfully completed projects to meet with various international floor flatness specifications in Spain and La Réunion Island. The client, a global specialist in energy management, operated Jungheinrich Trucks – EKX and EKS models, some narrow aisle and order picking trucks at their facility in Barcelona. Working [...]

2017-04-27T11:08:18+00:00 March 1st, 2013|